Stem mastering. Targeted tweaks.

Up to fourteen grouped stems, £56 per track. When the kick and bass will not sit, the vocal will not settle or the top end is harsh, stem mastering allows me to resolve the problem without turning the job into a mix.

Is it the right service for your track?

When stems mastering helps

Low end that fights (kick versus bass), vocals that are sibilant or buried, harshness in the upper mids, a mix that lacks separation, width or depth, or a genre that needs serious loudness without losing punch.

When stereo is enough

If the mix is balanced and you are happy with it, stereo mastering at £30 is the right service. If you are unsure initially send your stereo mix.

What it is not

Stem mastering is not mixing. No fader riding, no vocal tuning, no hundreds of tracks and alternate takes. Stems are groups of like instruments that sum to your mix; I work on the groups and the whole.

What you get back

A stereo master, dithered 24-bit WAV, plus the usual alternate versions. Individual mastered stems are not returned because they would not sum to the master.

Two short videos

Stem mastering explained in a few minutes.
How to export stems that re-combine correctly.

How to prepare stems

  1. Export every stem from the same point

    All stems 24-bit, identical length, exported from the same timeline position so they re-sync exactly. Set your locators and bounce each group.

  2. Do not pre-balance for me

    The stems must sum to the mix you intended. Do not change stem levels in anticipation of what I might do. If you mixed into a limiter, send the limited stereo mix too so I can hear what you heard.

  3. Tell me what bothers you

    Notes like “bass muddy”, “drums lack punch”, “vocal too bright in the choruses” point me at the work. One reference track, not three.

  4. Typical groups for stem mastering

    Drums, bass, guitars, keys, lead vocal, backing vocals, effects, or for electronic music kick, snare, hats, percussion, bass, sub, leads, pads, FX and vocals. Up to fourteen.

Pricing and revisions

Stem mastering here is £56 per track, which is lower than many studios charge for stereo mastering. It takes considerably more time than stereo work, which is the honest reason for the higher rate, but it is often the difference between a good master and a great one when the mix has a specific weakness. Revisions on stem mastering as sent are included, within reason; resubmitting changed stems is £15, because it means emailing, listening again, checks and quality control, and the job may go through the analogue chain again in real time.

Stem questions

How many stems can I send?

Up to fourteen stereo stems per track are included in the £56 rate.

Can you add reverb or delay to a stem?

A little high-quality reverb or delay if you are stuck, yes. Vocal tuning and detailed effects work must be done in the mix.

Will you send the mastered stems back?

No. Master-bus processing interacts with the summed stems, so individually processed stems would not add up to the master. You receive a stereo master.

Can I combine stems with a reference?

Yes, send one reference with the stems. It is used as a rough guide for tone and perceived loudness.

Send the stems.

Or send the stereo mix first and I will tell you whether stem mastering would help.

See pricing Send your mix